Audio Connections - Behringer XENYX 1002B User Manual

6
XENYX 1002B User Manual
2.

Audio Connections

Balanced use with XLR connectors
2 1
3
input
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
1
2
3
output
For unbalanced use, pin 1 and pin 3 have to be bridged
Fig. 2.1: XLR Balanced
Balanced ¼" TRS connector
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Fig. 2.2: ¼" Balanced
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
cold (-ve)
tip
hot (+ve)
Unbalanced ¼" TS connector
Fig. 2.3: ¼" Unbalanced
tip
sleeve
shield
Fig. 2.4: RCA
Insert send return ¼" TRS connector
Connect the insert send with the input and the
insert return with the output of the effects device.
Fig. 2.5: Insert cable
Strain relief clamp
Sleeve
Tip
Sleeve
(ground/shield)
Tip
(signal)
tip
sleeve
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
ring
return (in)
tip
send (out)