AEG LAVAMAT BELLA 1480 User Manual page 33

Leveling
Precise leveling will prevent vibrations, noise and movements of the
washing machine during operation.
Water inlet
The fault is shown when a red mark appears in the window «A». Turn
off the water inlet tap and call the After Sales Department.
Please install the water inlet hose onto the back of your washing
machine :
Make the washing machine level by adjusting
the leveling screw that is too short.
Unscrew the stand and locking collar assembly
(lift the washing machine if necessary).
When the washing machine is stable, maintain
the stand on the ground and turn the locking
collar as far as possible.
This device (the aqua-control hose) protects
against water damage. The water inlet hose
may perish due to natural wear : if this
happens, this device stops water entering the
appliance.
- Screw on the bottom fitting of the water inlet
hose as shown in fig.1 and fig.2.
User information
33