Selecting The Cool Mode - Samsung MH FW series User Manual

Selecting the Cool Mode

Control Panel
10
E-
You can select the Cool mode if you want to cool your room.
You can adjust the temperature and the fan speed when cooling.
1 If necessary, press the
N The operation indicator on the indoor unit lights up.
Result:
N The air conditioner starts up in the mode you selected last.
N The indoor unit beeps.
2 Press the button on the remote control until
N The indoor unit beeps each time you press the
Result:
N The air conditioner runs in the Cool mode.
N N o o t t e e You can change modes at any time.
N N o o t t e e
3
Press the button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
N Each time you press the
Result:
- The temperature is adjusted by 1°C
- The indoor unit beeps
N If the room temperature is higher than the selected
temperature, the air conditioner starts cooling.
N If the room temperature reaches the set temperature, the air
conditioner stops cooling, but the fan operates consistently.
4
Press the button to select the fan speed until the required setting
is displayed.
Automatic (rotated :
Low
Medium
High
N Each time you press the
Result:
N The fan speed indicator increases and decreases
continuously and turns round each time you press
the button.
N N o o t t e e The fan speed indicator of the indoor unit varies according to
N N o o t t e e
the temperature in the Automatic fan speed.
5
To control the airflow direction, refer to page 19.
(On/Off) button.
is displayed.
button:
button, the indoor unit beeps.
button.
)