Table of Contents
Advertisement
10 electrolux
The monitoring functions can only be
set when the ventilation is switched off
and the glass extension cover is not
pulled out.
Grease filter monitor function
The monitor function for the grease filter is
enabled by default. After 40 hours of opera-
tion, indicator light f is continuously illumina-
ted when the hood is extended. It is time to
clean the filter when indicator light f comes
on, if not sooner.
When the filters have been cleaned, press
the function button for 3 seconds until indi-
cator light f goes out (the timer is reset, or
enabled if switched off).
Activated carbon filter monitor function
In recirculating mode and when an activated
carbon filter is fitted, it is advisable to enable
the monitor function for the activated carbon
filter. To enable this function, press and hold
button 2 for 10 seconds, until indicator light
C comes on.
After 120 hours of operation, indicator light
C is continuously illuminated when the hood
is extended. The activated carbon filter must
be regenerated after 120 hours. After the
activated carbon filter has been reinserted,
press the function button for 3 seconds until
indicator light C goes out (the timer is reset).
Displaying the Monitoring Functions
Pressing the function key makes the LEDs
for counters f and C light up, when they are
active.
Light
Light
Function button
Function button
f
c
f
c
Grease filter
Grease filter
Function button
Function button
f
c
c
f
Activated charcoal filter
Activated charcoal filter
f
c
Advertisement
Table of Contents
