Dyson AM04 Operating Manual page 7

3. Airflow speed control
To change the airflow speed press the airflow speed
control button. The digital display will show the new
speed; after 3 seconds it will change back to the
target temperature.
Tilt function
Carefully hold the base and the top of the air loop amplifier.
Tilt forward or backward for the required airflow angle.
4. Oscillation control
To start the heater oscillating, press the oscillation
control button. To stop the heater oscillating, press it
again. The heater will not oscillate when the control
buttons are pressed.
Power and remote control*
Stand by
on/off
Airflow speed
control
*Remote control with select models only.
Remote control docks magnetically
Attach remote control to top of heater
with the buttons facing down.
To operate, point remote control toward the front of the base.
Oscillation
on/off
Thermostat
control
7