Advertisement
If another handset user is calling, you will
hear a 2 second ringing tone to alert you
that they are going to speak.
You will then hear them speaking to you.
The
indicate that you are receiving a call. (You
may need to adjust the volume, see p12).
When the other handset user has finished
speaking you can respond to the call,
press and hold the
the handset about 3 inches (7
your mouth and speak into the microphone.
The transmission icon will be shown on
the display.
Release the
finished speaking.
If there are no transmissions for 10 seconds your
BT Freeway will automatically switch to battery
saver mode. This is indicated by a flashing
icon on the display.
If any incoming or outgoing calls are made the
handset will return to standby mode.
icon will be shown on the display to
button when you have
button, then hold
⁄
cm) from
1
2
15
Advertisement
