Contents Warranty Introduction Environmental protection Description of symbols Specifications General safety rules Additional safety rules for cordless nailers Additional safety rules for the charging system 7 Additional safety rules for the battery pack Know your product Accessories Unpacking Assembly Installing and removing the battery pack Battery charging To obtain the best life for the battery Battery indicator...
Introduction Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria. You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.
Specifications Charger input: 230 –240V ~ 50Hz 62W output: 18Vdc, 2.2A Charging time: 1 hour approx. Battery capacity: 1.5 Ah Nominal battery voltage: No load speed: 0 –16000 min Hammer rate: 0 –5500 min Nail length: 40mm (1-5/8") to 150mm (6") Nail type: Accepts all commonly available nail types including...
Page 5
3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
d. When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to Shorting the battery terminals together may cause burns or a fire.
WARNING. Always remove the battery from the tool before making any adjustments or performing maintenance. Wear goggles Wear earmuffs Wear a breathing mask Additional safety rules for the charging system 1. Before using the charging system, read all the instructions and cautionary markings on the adaptor charger, charging stand and battery pack as well as the instructions on using the battery pack.
Page 8
3. Do not incinerate the battery pack even if it is seriously damaged or can no longer hold a charge. The battery pack can explode in a fire. 4. A small leakage of liquid from the battery pack may occur under extreme usage or temperature conditions.
Failure to do so could result in serious personal injury. Assembly The ALN18V Allnailer is packed fully assembled. ® Installing and removing the battery pack...
Avoid allowing loose items like screws or nails etc. to be stored with battery packs as these or similar items can short-out battery packs and cause a fire or explosion. Always unplug the charger when not in use and store in a dry secure place.
Loading a nail 1. Hold the nailer in the operating position and use your thumb to press the jaw release button (4) (Fig. K). 2. Insert the nail, head first, between the jaws (3) as far as it will go and then release the jaws by taking your thumb off the jaw release button (4) (Fig.
Maintenance and repair General Inspection Regularly check that all the fixing screws are tight. They may vibrate loose over time (Fig. P). Maintenance WARNING. Always ensure that the tool is switched off and the battery pack is removed before making any adjustments or maintenance procedures.
Page 16
GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au.