Wall
You can mix manual and
mounting
memory dialling as required, for
example, you can dial the area
code 020 8304 from the memory
Locate lugs and mount the
and then complete the number
plinth provided into the holes
manually.
under the base unit as shown.
Swing the plinth down to clip
into the top hole.
Lift the handset.
Press the
button. The call
indicator light will flash.
Press the memory location
number (
) or (
,
,
)
under which you have stored the
number you wish to delete.
Press the
button.
Drill 2 holes, 25mm deep using
You will hear a confirmation tone.
a 3mm drill, for the screws
Replace the handset.
provided, using the template.
Ensure that you do not drill into
Alternatively, any existing
any hidden wiring or pipes.
number stored in the Quickdial
Insert the wall plugs provided
or One-Touch memories can be
and then insert a screw into each
overwritten by entering a new
hole. Leave 2-3mm between the
number under the same memory
head of the screw and the wall.
location. Simply follow the
Position the product onto the
instructions under the storing
screws.
numbers sections previously shown.
Drop down to secure.
If any error occurs in the storing
mode you will hear three short
beeps, then the product will
return to talk mode.
If you unplug your BT Decor 110
the numbers stored in the
memory will be saved. However,
the last number redial memory
will be lost.
Hereby, Suncorp Technologies Ltd,
declares that this BT Decor 110
is in compliance with the essential
For a full range of accessories and
requirements and other relevant
replacement items for BT
provisions of Directive 1999/5/EC.
products please call 0870 240 5522,
The Declaration of Conformance
or visit:
for the BT Decor 110 is published
on the website
http://www.suncorptech.com/bt
General information
Your BT Decor 110 is guaranteed
Pack the unit securely, preferably
for a period of 12 months from the
in the original packaging. All parts
date of purchase.
must be returned. We cannot take
Subject to the terms listed below
responsibility for goods damaged
the guarantee will provide for the
in transit.
repair of, or at BT's or its agent's
discretion the option to replace the
BT Decor 110, or any component
thereof, which is identified as
faulty or below standard, or fails as
a result of inferior workmanship
All items of telephone equipment
or materials. Products over 28 days
have a Ringer Equivalence
old from the date of purchase
Number (REN), which is used to
may be replaced with a refurbished
calculate the number of items
or repaired product.
which may be connected to any
one telephone line. Your
BT Decor 110 has a REN of 1.
A total REN of 4 is allowed, if the
total REN of 4 is exceeded, the
• The guarantee shall only apply
telephones may not ring. With
to defects that occur within the
different telephone types there is
12 month guarantee period.
no guarantee of ringing, even
• Proof of purchase is provided.
when the REN is less than 4.
• The equipment is returned to
the point of purchase.
This product is intended for use
• This guarantee does not cover
within the UK for connection to
any faults or defects caused by
the public telephone network and
accidents, misuse, fair wear
compatible switchboards, which
and tear, neglect, tampering
support tone dialling and time
with the equipment, or any
break recall. If in doubt please
attempt at adjustment or repair
consult your service provider.
other than by approved agents.
• This guarantee does not affect
your statutory rights.
In the unlikely event of a defect
occurring, please return the
product, with the receipt, to the
place of purchase.
The telecommunications services described in
this publication are subject to availability and
may be modified from time to time. Services
and equipment are provided subject to British
Telecommunications plc's respective standard
If your product needs repair after
conditions of contract. Nothing in this publication
the guarantee period has ended,
forms any part of any contract.
the repair must meet the approval
© British Telecommunications plc 2003.
requirements for connection to the
Registered Office: 81 Newgate Street, London
EC1A 7AJ.
telephone network. We recommend
Registered in England No. 1800000.
that you contact BT's approved
BT Decor 110 Issue 2 (8/03) 1
Designed by the Art & Design Partnership
repair agent, TecLogic on 01672
Limited.
564444 or a local qualified repairer.
Printed in China.
BT Decor 110
This product is intended
for connection to analogue public switched
telephone networks and private switchboards
in the United Kingdom.
Need help?
Do you have a question about the DECOR 110 and is the answer not in the manual?
Questions and answers