Installing The Modulus Subwoofer - Infinity Modulus Owner's Manual

Hide thumbs Also See for Infinity Modulus:
Table of Contents

Advertisement

I
M
S
NSTALLING THE
ODULUS
UBWOOFER
The rear panel metal plate acts as a heatsink for the subwoofer's
internal amplifier.There should be at least 10 cm of free space
around the heatsink for air circulation. Do not place pillows or
other objects against it.
We recommend placing the subwoofer at least 2 to 3 feet away
from a television or a computer's disc-drive system to prevent
smearing the colors of the TV picture or erasing of the magnetic
drive.
Placement will depend upon your room and the amount and quality
of bass required (for example, whether or not your room permits
placement of the subwoofer near one of the front satellites).
Never place the port too close to a wall or piece of furniture as
this will prevent the port from operating properly. Since the port is
an integral part of the subwoofer's design, it should always be
permitted free access to the listening room without obstruction to
the sound emerging from it.
Careful experimentation will enable you to determine the best
position for the subwoofer. See suggestions on next page.
CAUTION:
The subwoofer's rubber feet can under certain conditions smudge
or discolor light colored and delicate surfaces. Please place a
protective mat or coaster under the rubber feet to prevent
marking or discoloration.
M
10
ODULUS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Infinity Modulus and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Modulus hcs

Table of Contents