Changing The Signal Tone - AEG COMPETENCE B 4140 Operating Instructions Manual

Checking the Countdown Setting
A few seconds after the countdown has been set, the time display indi-
cates the current time again. You can check the amount of time left on
the countdown at any time.
1. Using the "CLOCK" C button, re-select the time set on the countdown.
0
The time remaining on the countdown is displayed.

Changing the Signal Tone

The frequency of the signal tone can be set to 3 different tones.
1. Press the - button until the changed signal tone sounds and release.
0
The frequency is set to the next level.
2. Press the - button again until the changed signal tone sounds and
release.
The frequency is set to the next level.
Operating Instructions
19