Table of Contents
Advertisement
18 www.aeg.com
12.6 The inlet hose filter and
the valve filter
WARNING!
• Disconnect the mains plug
To clean the water inlet filters:
from the mains socket.
2.
Put a container below the recess of
the drain filter to collect the water
that flows out. Turn the filter until it
is vertical.
3.
Turn the filter fully and remove it.
4.
Remove fluff and objects.
5.
Clean the filter with water.
6.
Put it back and screw it in.
7.
Make sure that you tighten correctly
the filter to prevent leakages.
8.
Close the drain filter door.
Close the water tap.
1.
2.
Remove the water inlet hose from
the water tap.
3.
Clean the filter in the inlet hose with
a stiff brush.
4.
Remove the inlet hose behind the
appliance.
5.
Clean the filter in the valve with a
stiff brush or a towel.
Advertisement
Table of Contents
