Indicator Led Identification - Pfaff TruStitch Owner's Manual

Indicator LED Identification

Both the TruStitch™ controller and
receiver have indicator LEDs to guide
the user.
1.
The controller has a flashing
WHITE LED that flashes only in low
light conditions, such as when it is
under the quilt. This helps the quilter
find the controller. The light shuts off
when the controller is in full light.
The second LED turns YELLOW
when the controller needs to be
charged. It turns BLUE during charg-
ing and turns OFF when the control-
ler is fully charged (Figure 8).
2.
The receiver has three Indica-
tor LEDs.
The left LED FLASHES RED when it
is powered on, but not connected to
the machine and/or the controller.
The middle LED lights up YELLOW
when the controller needs to be
charged. It turns off when charging.
The right LED lights BLUE when the
unit is powered on. See Figure 9
for placement of these LEDs.
Figure 9. Receiver Indicator LED Placement
Finder LED
Charge Indicator LED
Light Sensor
White
Yellow/
Blue
Figure 8.
Left: Connection Indicator LED
(flashes RED when no connection)
Middle: Charge Indicator LED
(turns YELLOW when controller
needs charging)
Right: Power Indicator LED (turns
BLUE when receiver is powered
on)
9