Zanussi ZWDD 110 User Manual page 21

Problem
• Spinning starts late or the machine
does not spin:
• The machine does not dry:
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and
purchase date of your machine: the Service Centre
will require this information.
Possible cause
• The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and
normal spinning can resume. If, after 10 minutes,
the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case,
redistribute the load manually and select the spin
programme.
• The drying time has not been selected.
• The tap is closed.
• The drain filter is blocked.
• A suitable drying time in the correct sector has
not been selected.
• The drum is overloaded.
41