Belkin F5D7230-4 User Manual page 44

MANUALLY CONFIGURING NETWORK SETTINGS IN WINDOWS 2000, NT, OR XP
1. Click "Start", "Settings", then "Control Panel".
2. Double-click on the "Network and dial-up connections" icon (Windows 2000)
or the "Network" icon (Windows XP).
3. Right-click on the "Local Area Connection" associated with your network
adapter and select "Properties" from the drop-down menu.
4. In the "Local Area Connection Properties" window, click "Internet Protocol
(TCP/IP)" and click the "Properties" button. The following screen will appear:
(1)
(2)
(3)
5. If "Use the following IP address" (2) is selected, your Router will need to be
set up for a static IP connection type. Write the address information the table
below. You will need to enter this information into the Router.
6. If not already selected, select "Obtain an IP address automatically" (1) and
"Obtain DNS server address automatically" (3). Click "OK".
Your network settings are now configured for use with the Router.
84
MANUALLY CONFIGURING NETWORK SETTINGS IN WINDOWS 98 OR ME
1. Right-click on "My Network Neighborhood" and select "Properties" from the
drop-down menu.
2. Select "TCP/IP -> settings" for your installed network adapter. You will see the
following window.
(1)
(2)
3. If "Specify and IP address" is selected, your Router will need to be set up for
a static IP connection type. Write the address information in the table below.
You will need to enter this information into the Router.
4. Write the IP address and subnet mask from the "IP Address" tab (3).
5. Click the "Gateway" tab (2). Write the gateway address down in the chart.
(3)
85