Getting Started - Shark NV80 Owner's Manual

Getting Started

C
A
E
B
G
I
WHAT'S IN THE BOX YOU JUST
OPENED:
A
Vacuum Body
B Floor Power Nozzle
C
Handle Assembly
D
Super Stretch Hose
E
Cleaning Wand with Handle
F
Cleaning Wand
G Pet Hair Power Brush
H
Cleaning Attachments
I
16" Crevice Tool*
J
Accessory Bag (not shown)
* Note: The crevice tool may be
stored in the Cleaning Wand.
4 TOLL FREE: 1-800-798-7398
NV80_26_IB_E_111130_3.indd 4
D
7
F
H
3
Your Shark
Professional is easy to
assemble:
1
Lay your vacuum body on a
level surface.
2
Slide the electrical connection
from the power nozzle into the
main body to click into place.
3
Connect the hose from the main
body to the power nozzle; push
with a slight turning motion to
create a snug fit.
4
Slide the handle assembly
into the upright unit aligning
the hose hook on the handle
assembly with the power cord
hooks on the back of the unit.
4
5
2
Navigator
® ™
8
5
Secure the handle assembly in
place with included nut/bolt
(shipped attached to handle
assembly).
6
Place the vacuum in the upright
position.
7
Insert the Cleaning Wand with
the Handle into the center post
on the tool caddy. Insert the
16" Crevice Tool onto the post
in front.
8
Store the Crevice Tool, Dusting
Brush on the back of the unit.
Store the Cleaning Wand onto
the back post of the tool caddy.
11-11-30 3:26 PM