Table of Contents
Advertisement
CONTROL PANEL
LCD when VOL
pad has been
pressed and
volume is set to 6
using Arrow
touch pads.
targets continue to get louder. Exit the volume function by
momentarily pressing and releasing the SEARCH/PINPOINT
touch pad.*
NORM/SALT: Press momentarily and release to
select either the NORM or SALT mode. A cursor will
remain above the appropriate mode name
(NORMAL or SALT). Use the SALT mode when beach
hunting on wet sand.
AUTO 5 AUTO/I.D.: Press momentarily and release to
change from the Autotune mode to the Target I.D.
mode or vice versa (this should take less than a
second). A cursor will let you know which mode
you are in. (See p. 17 for more on the Autotune mode.)
SENS: Press and hold until the numbers 0-10, a row
of cursors and "SENS" appear. Adjust sensitivity as
you did the volume above. Exit the sensitivity
function by momentarily pressing and releasing the
SEARCH/PINPOINT pad.*
LCD when SENS
pad has been
pushed and
sensitivity is set to
8 using the Arrow
touch pads.
PRESET: When this pad is pressed and held
momentarily, the CZ-7a Pro defaults to the factory
preset control settings:
Factory preset
control settings
on LCD when
PRESET pad has
been pushed.
0
2
4
6
0
2
4
6
8
10
VOL
8
10
SENS
12
Hide quick links:
Advertisement
Table of Contents
