Advertisement
Quick Links
Advertisement
Related Manuals for Leslie 002-LESLIE
Summary of Contents for Leslie 002-LESLIE
- Page 1 OWNER’S MANUAL Model: 002-LESLIE PEDAL...
- Page 2 2013 Hammond USA LP0708...
- Page 3 Congratulations on purchasing the FIRST EVER Digital Leslie Pedal. If this is your first LESLIE, Welcome to our family; if you’re already one of us, welcome home. The Leslie Speaker was invented by Donald H. Leslie in 1940 to make the Hammond Organ sound more like a Theatre Pipe Organ, but even Don Leslie couldn’t begin to imagine...
- Page 4 Leslie effect appeared, but none had the soul or sound of the genuine article. When the digital age began, the goal drew a little closer, but the true Leslie sound still proved to be elusive. 2 haMMOND Usa...
- Page 5 The Hammond and Leslie Engineers, some of which were contemporaries of Don Leslie himself, set out to do what has seemed impossible - to make a purely Digital Leslie worthy of that legendary name. In 2012, the Hammond SK1 was released to instant acclaim, and word spread quickly that the Digital Leslie onboard that 15 pound wonder truly and finally “nailed”...
- Page 6 Mono output is needed, use the LEFT output. NOTE: If you are connected with a MONO cable, the Leslie Effect will be output in Stereo, but in BYPASS mode, only the Left Channel will be output.
- Page 7 PeDal 5...
- Page 8 RISE & FALL: (Ramp Up/Down) Each of the 3 Rotary Cabinet Profiles has its own Rise and Fall speeds that are accurate to the actual Leslie model it is based on. You can increase or decrease these speeds, preserving the individual high/low ratios.
- Page 9 MODEL 122A The “Classic” Leslie, made famous as paired with a 1950s Hammond B-3. MODEL 147A A slightly brighter sound, often referred to as the “Rock and Roll” Leslie MODEL 18V The Original “Vibratone” Guitar Leslie with one spinning drum MODEL PR-40 The Original Hammond Organ Tone Cabinet.
- Page 10 NOTE: If you are connected with a MONO cable, the Leslie Effect will be output in Stereo, but in BYPASS mode, only the Left Channel will be output. When the pedal is in BYPASS mode, left_in goes to left_out and right_in goes to right_out.
- Page 11 • Stereo operation is preferred to mono. • When using with a Guitar, insert this Leslie Pedal LAST in your chain, following anything that induces Overdrive or Distortion. • If you are using a mono input, and require two channels of output in BYPASS mode, use a mono to stereo splitter on the input jack.
-
Page 12: Specifications
sPecificatiONs Signal Processing: 32-bit 150 MIPs Pittsburgh Digital DSP Analog/Digital Conversion: 24-bit 115dB Digital/Analog Conversion: 24-bit 115dB Input Sensitivity: 0dBV (low gain) and -6dBV (high gain) Input Impedance: 500 Kohm nominal Output Impedance: 150 ohm nominal Output Level: +6dBV Dimensions: 7 5/16”... -
Page 13: Safety Information
Good Vibes you’ll get from playing this pedal are acceptable.) • Pull the plug when not in use - and remove the adapter from the wall socket. Do not transport the Pedal with the AC adapter plug attached. the leslie PeDal 11... -
Page 14: Warranty
warraNty We guarantee that your pedal will be free of defects in workmanship for a period of one (1) year from the date of purchase. We also guarantee the continued operation of all components for a period of one (1) year from the date of purchase. Within this one year period Hammond will repair or replace at our discretion any pedal that ceases to function properly as a result of faulty workmanship or materials. - Page 15 Should the owner require further assistance, inquiries should first be made to your Authorized Hammond and/or Leslie Dealer. If you still need further assistance, contact Hammond at the following address. Hammond USA...
- Page 16 Designed and Manufactured in the Usa...
Need help?
Do you have a question about the 002-LESLIE and is the answer not in the manual?
Questions and answers