Table of Contents
Advertisement
152975 61/0en
25-09-2002
Before using your dishwasher for the first time
1. Ensure that the electrical and water connections comply with the
installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour 1 litre of water inside the salt container and then fill with salt.
5. Fill the rinse-aid dispenser.
Setting the water hardness range
The dishwasher is equipped with a water softener designed to remove minerals and
salts from the water supply, which would have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, German, French degrees and PPM
(parts per Million).
The softener should be adjusted according to the hardness of the water in your area.
Your local Water Authority can advise you on the hardness of the water in your area.
The dishwasher is factory set at level 4.
If this level is not suitable for your area the softener should be adjusted.
Level
(german degrees)
0
1
2
3
4
5
6
7
8
9
If your water hardness is level 0 it is already soft and therefore there is no need
to use salt. With the setting of the water softener at level 0 the salt indicator
light on the control panel will always remain off.
10:04
Pagina 11
Water hardness
°dH
°TH
(french degrees)
0 - 4
0 - 8
5 - 8
9 - 14
9 - 11
15 - 20
12 - 17
21 - 30
18 - 22
31 - 40
23 - 28
41 - 50
29 - 33
51 - 60
34 - 39
61 - 70
40 - 45
71 - 80
46 - 50
81 - 90
Use of salt
PPM
(parts per million)
0 - 80
NO
81 - 140
YES
141 - 200
YES
201 - 300
YES
301 - 400
YES
401 - 500
YES
501 - 600
YES
601 - 700
YES
701 - 800
YES
801 - 900
YES
11
Hide quick links:
Advertisement
Table of Contents
