Epson LX-300+ User Manual page 79

Settings
Dithering
Intensity/ Intensity
Control
Color (LX-300+
only)
Print quality
EPSON Status
Monitor 3
Monitoring
Preferences
Paper/Output
Halftone
The monitoring settings are shown below.
Settings
EPSON Status
Monitor 3
Explanations
You can leave this option set to Fine, which is the default setting,
or select another dithering pattern depending on the kind of
printout you want.
Move the slider to make your printout lighter or darker.
The printer will print in color when there is a checkmark in this
check box. If you want to print in monochrome or gray scale,
remove the checkmark.
Select a print quality option from the Print quality list.
If you turn on Hi-speed, you will enter bi-directional printing
mode and printing speed will increase. Turning Hi-speed off will
return the printer to uni-directional printing mode. Printing
speed will decrease, but printing precision will improve.
Printing with the default settings uses the settings stored in the
printer.
You can access the EPSON Status Monitor 3 utility when you
click this button. To monitor the printer, make sure the Monitor
the printing status check box is selected.
Click this button to open the Monitoring Preferences dialog box
where you can make settings for the EPSON Status Monitor 3
utility.
Check the Paper Size, Orientation, and Paper Source settings
you made on the Page Setup menu and change them if necessary.
Select the setting and then choose an option from the Change
Setting list box.
Click this button to set the brightness and contrast, input the
RGB gamma, or make other settings. The Halftone Color
Adjustment dialog box appears. For details, click the Help
button in this dialog box.
Explanations
You can access the EPSON Status Monitor 3 utility when you
click this button. To monitor the printer, make sure the Monitor
the printing status check box is selected.
Using the Printer Software
1
1
1
1
1
1
1
1
1
1
1
1
79