Setting The Time - Citizen 6765 Instruction Manual

4. SETTING THE TIME

When setting the current time, it is essential to set both the Main watch and Sub
watch to the same time. If the Sub watch is not matched to the Main watch, the
Repeater will not sound properly.
<MAIN WATCH>
Minute hand
Mode
hand
Small
second
hand
2nd step
position
Hour hand
14
(1) Pull the crown out to the 2nd step
position when the small second
hand is at 0 position (12 o'clock)
and stops.
* When the crown is pulled out the 2nd
step, the mode hand points to "0." At
the same time, the date hand changes
to the Sub watch second hand and
moves to the 0 (12 o'clock) position
and stops.
(2) Turn the crown to set the Main
watch to the current time.
<SUB WATCH>
Second
hand
Button (A)
2nd step
position
Button (B)
Hour
hand
AM/PM
Minute hand
(4) When the Sub watch second hand is not aligned with the "0 sec" position, press
(A) button to set it to this position.
Press the (A) button to advance the second hand in 1-second increments.
Press and hold down the (A) button to quick-advance the second hand.
(3) Press the (B) button to set the Sub
watch to the current time.
* The time setting advances one
minute each time the (B) button is
pressed. Press and hold down the
(B) button to quick-advance the
hour, minute hand.
NOTE:
The Sub watch hour, minute hands
are synchronized with the AM/PM
hand. Watch the AM/PM hand when
adjusting the Sub watch time setting
to ensure the proper setting is made.
15