Baby Jogger CITY MICRO SINGLE Assembly Instructions Manual page 5

Canopy
1
To attach canopy to frame: Hook
canopy frame to canopy bracket
on stroller.
3
Insert canopy screw, with washers, into
canopy bracket hole on stroller.
6
2
Line washers up on canopy screw.
4
Using an allen wrench, tighten screw
into bracket until canopy is secure on
stroller frame. Do not over tighten.
Seat
1
2
Snap seat to frame, starting with Secure seat straps around the
the top snap closest to the handle, bottom of the frame, behind the
and working your way down to
front wheel. Thread one seat strap
the frame behind the front wheel.
through the D ring of the other
strap, and fasten both Velcro
sides firmly together.
3
Secure safety
straps to both
sides of the
4
frame before use. Be sure that fold strap rings are secured
to the frame before use.
Warning: always
be sure the safety
strap is securely
snapped onto the
frame before using
stroller!
7