Rear Wheel (Fz6-Shg) - Yamaha Fazer FZ6-SHG Owner's Manual

Tightening torques:
Wheel axle:
72 Nm (7.2 m·kgf, 52 ft·lbf)
Front wheel axle pinch bolt:
19 Nm (1.9 m·kgf, 13 ft·lbf)
Brake caliper bolt:
40 Nm (4.0 m·kgf, 29 ft·lbf)
6. Push down hard on the handlebar
several times to check for proper
fork operation.
PERIODIC MAINTENANCE AND MINOR REPAIR

Rear wheel (FZ6-SHG)

WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
To remove the rear wheel
WARNING
G
It is advisable to have a Yamaha
dealer service the wheel.
G Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the axle nut.
2. Place the motorcycle on the cen-
terstand.
3. Remove the axle nut.
4. Loosen the locknut and drive chain
adjusting bolt on each side of the
swingarm.
6-39
EAU44800
EWA14840
EAU25150
EWA10820
1. Locknut
2. Drive chain slack adjusting bolt
3. Axle nut
5. While supporting the brake caliper
and slightly lifting the wheel, pull
the wheel axle out.
6