Electrolux EWT 136541 W User Manual page 12

Electrolux washing machine
Table of Contents

Advertisement

12 electrolux
UNPACKING
1
2
UNTYING
A
B
C
D
2 B
1
1
2
C
1
To install your washing machine at the
same level as surrounding furniture, pro-
ceed as shown on picture D.
WATER SUPPLY
Install the supplied water inlet hose at the
rear of your washing machine by proceed-
ing as follows. Do not reuse an old hose.
The water inlet hose can not be extended. If
it is too short, please contact the after-sales
service.
Open the water inlet tap. Check there are
no leaks.
DRAINAGE
A
Fit the U-piece on
the drainage hose.
Place everything in a
drainage point (or in
a sink) at a height of
between 70 and 100
cm. Ensure it is posi-
tioned securely. Air
must be able to en-
1
ter the end of the
hose, to avoid any risk of siphoning.
The drain hose must never be stretched. If
it is too short, contact an engineer.
2
ELECTRICAL CONNECTION
This washing machine must only be con-
nected in single-phased 230 V. Check the
fuse size: 10 A for 230 V. The appliance
D
must not be connected with an extension
lead or multi-plug adaptor. Ensure that the
plug is earthed and that it is in accordance
with current regulations.
POSITIONING
Position the appliance on a flat and hard
surface in a ventilated location. Ensure the
appliance does not come into contact with
the wall or other furniture. Accurate levelling
avoids vibrations, noise and prevents the
appliance from moving when running.
90
90
90
O
O
O
min
max
70 cm
100 cm

Advertisement

Table of Contents
loading

Table of Contents