Electrical Connection - AEG FAVORIT 64570 Vi User Information

Aeg the fully integratable dishwasher favorit 64570 vi
Hide thumbs Also See for FAVORIT 64570 Vi:
Table of Contents

Advertisement

Electrical Connection

1
WARNING - This appliance must be earthed.
The manufacturer declines any responsibility should these safety
measures not be observed.
Before switching on make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate.
To isolate the dishwasher from the mains, remove the mains plug.
Important: The plug must still be accessible after the appliance has
been installed.
Changing a fuse
The appliance is supplied with a 13amp plug fitted. In the event of hav-
ing to change the fuse in the plug supplied, a 13amp ASTA approved
(BS 1363A) fuse must be used.
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires on the mains lead are col-
oured in accordance with the fol-
lowing code.
Green and Yellow: Earth
Blue:
Brown:
• The wire coloured green and yellow must be connected to the termi-
nal marked with the letter "E" or by the earth symbol
green and yellow.
• The wire coloured blue must be connected to the terminal "N" or col-
oured black.
• The wire coloured brown must be connected to the terminal marked
"L" or coloured red.
• Upon completion there must be no cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheath.
1
WARNING! A cut off plug inserted into a 13 amp socket is a seri-
ous safety (shock) hazard. Ensure that the cut of plug is disposed
of safely.
Neutral
Live
Green & Yellow
Blue
Brown
Cord Clamp
or coloured
47

Advertisement

Table of Contents
loading

Table of Contents