Table of Contents
Advertisement
Inserting a Video Cassette
Gently insert the video cassette into the cassette compartment. The VCR turns on automatically and VCR display light
up. If the cassette is inserted incorrectly, the loading system will not function. Do not force the cassette into the VCR.
To remove the cassette, press the TAPE EJECT button during stop mode.
Playback
Preparation
Turn on the TV and select the video channel.
1. When the VCR is powered ON and set to VCR mode by pressing the FUNCTION button.
2. Press the VCR ON/OFF button on remote controller to turn on the VCR. The VCR display lights up.
3. Insert a cassette.
4. Press the PLAY
button.
5. To stop playback, press the VCR STOP
the tape to the beginning, turn its power off and ejects the tape.)
Notes:
• Press the CH +/- buttons during playback mode to change to manual tracking mode. Adjust the tracking using the
CH +/- buttons until the noise is minimized or eliminated.
• For tapes recorded in EP on another VCR that still have vertical jitter even after manual adjustment, hold down the
PLAY
button for about 2 seconds. (On-Screen Display may be blurred.) Ejecting the tape or turning off the
power will return playback to its normal mode.
Fast Forward and Rewind
1. When the VCR is in stop mode, press the
(The picture cannot be viewed in this mode.)
2. Press the VCR STOP
Notes:
• The
TUNING and TUNING
• After rewinding the T-120 cassette tape for about 2 minutes, you can fast forward the cassette tape.
Still Picture and Frame Advance
1. Press the PAUSE II button during playback. This will freeze the picture on your TV.
2. If the picture vibrates vertically during still mode, use the CH +/- buttons to adjust for minimum distortion. If noise
bars appear on the screen during still mode, set your VCR to the slow mode and press the CH +/- buttons to make
the noise disappear. Then press the PAUSE II button again.
3. Press the PAUSE II button during still mode for frame advance.
4. Press the PLAY
button again to resume normal playback.
Notes:
• There will be picture interference and possibly a change to black and white picture using Pause functions.
• PAUSE mode will disengage after about 5 minutes.
• Sound is muted during still picture, video search, frame advance.
Picture Disturbance during Playback
This VCR has an automatic tracking system which reduces picture disturbance when you start to playback a videotape.
When auto-tracking is in operation flashes on the On-Screen Display. If the picture still has disturbance you may
need to manually track the videotape : During PLAYBACK of a videotape.
• Press the CH+ or CH- button to position picture interference off the TV screen. (Manual Tuning)
• Press the CH+ and CH- buttons on front panel together to start Auto Tuning.
Auto Enhance
1. Press the DISPLAY button twice. " AUTO ENHANCE ON (or OFF)" will appear on the TV screen for a few second.
2. Press the SET button on the unit or ENTER button on remote controller. Each time the button is pressed, the
mode switches between ON and OFF. (The AUTO ENHANCE is preset to ON at the factory.)
ON:
Normally leave the mode set to ON. This high picture quality function will create a clearer image during playback.
OFF:
Set to OFF when playing back a tape on the VCR while editing or when strong noise appears on the screen.
Video Cassette Playback
button. (If the tape reaches its end, the VCR will automatically rewinds
TUNING or TUNING
button to halt fast forward or rewind.
buttons speeds may be slower for cassette tapes other than T-60, T-90 or T-120.
button to fast forward or rewind the cassette.
- 43 -
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
(continued to next page)
Advertisement
Table of Contents
