Adjusting The Sound - Akai CMB-4300SS Operator's Manual

Dvd + vcr home theater system

Hide thumbs

Table Of Contents

Table of Contents

To adjust the surround sound balance while Pro Logic decoding is in effect

Use the remote control to make the following changes to speaker balance:

Front speaker (left)

• Press the SOUND button repeatedly to display LEFT, then press the

sound level. It will show on the display window.

Front speaker (right)

• Press the SOUND button repeatedly to display RIGHT, then press the

sound level. It will show on the display window.

Center speaker

• Press the SOUND button repeatedly to display CENTER, then press the

the sound level. It will show on the display window.

Rear speaker (left)

• Press the SOUND button repeatedly to display REAR L, then press the

sound level. It will show on the display window.

Rear speaker (right)

• Press the SOUND button repeatedly to display REAR R, then press the

sound level. It will show on the display window.

Subwoofer

• Press the SOUND button repeatedly to display WOOFER, then press the

the sound level. It will show on the display window.

Note :

• If you do not press any button within a few seconds, the display will return to normal.

To adjust the sound quality

Press the SOUND button repeatedly to select an equalization mode (BASS, MIDDLE, TREBLE). Press the

CURSOR button to adjust the sound level.

BASS : the low range of sounds

MIDDLE : the mid range of sounds

TREBLE : the high range of sounds

Bass, middle and treble control the sound from the front left and right speakers.

Dolby Pro Logic is a sound system that was developed to get a better sense of presence

from sources encoded with Dolby Surround. The feeling of position has been improved

by the addition of a separate center speaker channel. Look for this logo on your DVD unit.

Dolby Digital

Dolby Digital is a sound system developed by Dolby Laboratories Inc. that gives movie theatre ambience to audio output

when the unit is connected to a Dolby Digital 5.1 channel processor or amplifier. This unit automatically recognizes DVDs

that have been recorded with Dolby Digital. Not all Dolby Digital sources are recorded

with 6 channels.

Some sources marked Dolby Digital may be recorded in Dolby Surround, a 2 channel

system. Look for this logo on your DVD unit.

"DTS" and "DTS Digital Surround" is a sound system which give movie theatre

ambience to audio output when the unit is connected to a DTS Digital Surround processor

or amplifier. This unit can recognizes DVDs that have been recorded with DTS Digital

Surround. Look for this logo on your DVD unit.

3 STEREO mode creates a Dolby Pro Logic sound effect using just the left, right and center channels. No sound comes

from the surround channel speakers. you can still select normal or wide effect in this mode.

Manufactured under license from Dolby Laboratories.

'Dolby' , 'Pro Logic' and the double-D symbol

DTS and DTS Digital Surround are trademarks of Digital Theater System, Inc.