Switching Off The Dishwasher - AEG FAVORIT 64080 Vi User Information

The fully integratable dishwasher
Table of Contents

Advertisement

Switching off the dishwasher

When the dishwasher cycle has ended, the dot shaped light signal
below the door of the appliance goes out.
If the acoustic signal has been enabled, a continuous tone will sound
for approx. 15 seconds at the end of the dishwashing cycle.
If the dishwasher door is not opened, the acoustic signal will repeat af-
ter 3 minutes and again after 6 minutes.
1
Carefully open the door. Hot steam may escape.
• Hot dishes are sensitive to knocks. Therefore leave the dishes to cool
for about 15 minutes before removing them. You also get a better
drying result.
• Dishes dry more quickly if you open the door for a moment after the
cycle has ended and then leave it slightly open.
1. Press the ON/OFF button. All display indicators will go out.
2. Turn off the water tap.
Removing the dishes
3
It is normal for the inner door and the dispensers to be damp.
• Empty the lower basket first, then the upper basket. This way you
avoid dripping water from the upper basket onto dishes in the lower
basket.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents