Advertisement
Quick Links
PLASMA MONITOR (DISPLAY)
Thank you for purchasing the Daewoo Electronic Plasma Monitor stand. This stand is
specifically designed only for the Daewoo Plasma Display (DSP-4210GM). To ensure the
safe operation of the unit, please read these instructions before installing.
INSTRUCTION MANUAL
STAND
DSP-ST10
S
T
A
N
D
Advertisement
Related Manuals for Daewoo DSP-ST10
Summary of Contents for Daewoo DSP-ST10
- Page 1 PLASMA MONITOR (DISPLAY) STAND Thank you for purchasing the Daewoo Electronic Plasma Monitor stand. This stand is specifically designed only for the Daewoo Plasma Display (DSP-4210GM). To ensure the safe operation of the unit, please read these instructions before installing.
- Page 2 TABLE OF CONTENTS 1. Check for enclosed parts ......1 2. Important Safety Instructions ...... 2 3. Assembly Instructions ......... 3 4. Disassembling Instructions ......5 1. PLEASE CHECK FOR THE ITEMS SHOWN BELOW STAND M5 SCREWS...
-
Page 3: Important Safety Instructions
PLASMA DISPLAY STAND 2. IMPORTANT SAFETY INSTRUCTIONS PLEASE FOLLOW THESE INSTRUCTIONS FOR YOUR SAFETY PLEASE KEEP THESE INSTRUCTIONS FOR YOUR SAFETY AND TO PREVENT ANY DAMAGE TO THIS UNIT. WARNING : Disregarding these instructions can result in serious injury. WARNING CAUTION : Disregarding these instructions will result in the mistreatment of the unit and can result in injury or damage to the unit. -
Page 4: Assembling Instructions
3. ASSEMBLING INSTRUCTIONS HOW TO DISPOSE OF THE PLASMA MONITOR WRAPPER First dispose of the wrapping band and Afterwards, dispose of the Styrofoam raise the top box to open. and remove the vinyl covering. HOW TO DISPOSE OF THE PROTECTIVE CAP. Place a protective covering over the As shown below, unscrew the screws and surface you will be working on and lay the... - Page 5 PLASMA DISPLAY STAND ASSEMBLING THE PLASMA DISPLAY STAND Slide the stand under the plasma display Open and take out the stand from the like the picture below. box and remove wrapper. Use the enclosed 2 M5 screws to secure the assembled stand. M5 Screws (Picture of a properly installed stand and display)
-
Page 6: Disassembling Instructions
4. DISASSEMBLING INSTRUCTIONS DISASSEMBLING PLASMA DISPLAY STAND Place a protective covering over the Completely unscrew the secured 2 surface you will be working on and lay the screws. plasma display as shown below. Pull the stand away from the plasma display to disassemble.
Need help?
Do you have a question about the DSP-ST10 and is the answer not in the manual?
Questions and answers