Advertisement
PLASMA MONITOR (DISPLAY)
Thank you for purchasing the Daewoo Electronic Plasma Monitor stand. This stand is
specifically designed only for the Daewoo Plasma Display. To ensure the safe operation of
the unit, please read these instructions before installing.
INSTRUCTION MANUAL
STAND
DP-ST22
DP-ST21
DP-ST20
S
T
A
N
D
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Daewoo DP-ST20
Summary of Contents for Daewoo DP-ST20
-
Page 1: Instruction Manual
PLASMA MONITOR (DISPLAY) Thank you for purchasing the Daewoo Electronic Plasma Monitor stand. This stand is specifically designed only for the Daewoo Plasma Display. To ensure the safe operation of the unit, please read these instructions before installing. INSTRUCTION MANUAL... - Page 2 TABLE OF CONTENTS 1. Check for enclosed parts ... 1 2. Important Safety Instructions ... 2 3. Assembly Instructions ... 3 4. Disassembling Instructions ... 5 1. PLEASE CHECK FOR THE ITEMS SHOWN BELOW STAND M5 SCREWS...
-
Page 3: Important Safety Instructions
PLASMA DISPLAY STAND 2. IMPORTANT SAFETY INSTRUCTIONS PLEASE FOLLOW THESE INSTRUCTIONS FOR YOUR SAFETY PLEASE KEEP THESE INSTRUCTIONS FOR YOUR SAFETY AND TO PREVENT ANY DAMAGE TO THIS UNIT. WARNING : Disregarding these instructions can result in WARNING serious injury. CAUTION : Disregarding these instructions will result in the CAUTION... -
Page 4: Assembling Instructions
3. ASSEMBLING INSTRUCTIONS HOW TO DISPOSE OF THE PLASMA MONITOR WRAPPER First dispose of the wrapping band and raise the top box to open. HOW TO DISPOSE OF THE PROTECTIVE CAP. Place a protective covering over the surface you will be working on and lay the plasma display as shown below. - Page 5 PLASMA DISPLAY STAND ASSEMBLING THE PLASMA DISPLAY STAND Open and take out the stand from the box and remove wrapper. Use the enclosed 2 M5 screws to secure the assembled stand. M5 Screws Slide the stand under the plasma display like the picture below.
-
Page 6: Disassembling Instructions
4. DISASSEMBLING INSTRUCTIONS DISASSEMBLING PLASMA DISPLAY STAND Place a protective covering over the surface you will be working on and lay the plasma display as shown below. Completely unscrew the secured 2 screws. Pull the stand away from the plasma display to disassemble.
Need help?
Do you have a question about the DP-ST20 and is the answer not in the manual?
Questions and answers