Download Print this page

Using Your Press & Refresh - Shark Press & Refresh GS500UKL User Manual

Hide thumbs Also See for Press & Refresh GS500UKL:

Advertisement

Using Your Press & Refresh
Practice makes perfect!
For best results, tilt the
It takes time to master
steamer forward slightly
the garment steaming
and press the wrinkle
techniques.
eraser directly on the
garment.
Fig. 1
The seam on the frame must line up
with the seam on the unit for proper
use and safety. The frame will snap into
place, double check to make sure the
seams are aligned.
Filling and refilling the water
Attaching the accessories:
reservoir:
3
Choose your desired frame.
1
Never fill the garment steamer
Using both hands, hold the
while it is plugged into an
frame on either side. Attach
electrical outlet.
the top of the frame to the
unit above the Wrinkle Eraser
2
Open the water cap and hold
into the notch. Next, secure
the the garment steamer
the pointed end of the frame
horizontally with the Wrinkle
around the bottom of the unit
Eraser
parallel to the floor.
and snap into place (Fig. 2).
Using the filling flask provided
fill the water tank to the Max
When using the upholstery/
Fill line. Be careful not to
delicate fabric frame:
overfill. Push the cap back into
NOTE: Remember, DO NOT use
place, making sure it closes
the garment steamer without
firmly (Fig. 1).
the small steam bonnet in place
NOTE: The water tank does not
4
Attach the desired bonnet to
have to be completely full for
the frame, then attach the
the fabric steamer to generate
frame to the unit. Pull either
steam. However, make sure
side of the bonnet over the top
that the water tank is at least
of the frame and secure the
half way full for optimal results.
10
FREEPHONE: 0800 862 0453
Fig. 3
Fig. 4
Fig. 2
bottom of the bonnet to the
frame (Fig. 3). Then attach the
frame to the garment steamer
as described above (Fig. 4).
IMPORTANT: Use caution
when changing the frames
when the unit is hot. The
frames are designed with a
steam guard around the bottom
to provide protection from heat
when placing or removing the
frames.
The small steam bonnet frame
must be attached at all times
during usage.
The frame should only be
removed for washing by hand,
if necessary (see page 13 for
care instructions).
Using the Press & Refresh
and
3
Once the selected attachment
vertical press pad:
is placed on the garment
steamer, turn the On/Off switch
CAUTION: The Wrinkle Eraser
to the "I" position, a blue LED
is not controlled by the steam
light will illuminate. It will take
trigger and is hot as long as the
approximately 1 minute for the
unit is turned on.
unit to heat up.
CAUTION: Do not over tilt the
4
Holding the garment steamer
unit when steaming overhead.
in the vertical position with the
CAUTION: Do not hold the
steam nozzle pointing away
unit in a fixed position on
from you, press and hold the
delicate fabrics and upholstered
steam trigger for continuous
items.
steam and begin steaming your
garments in a vertical motion.
CAUTION: The Wrinkle Eraser
Begin at the top of the garment
is hot. Use caution when
and move in a up and down
removing the frames. DO NOT
direction pressing the Wrinkle
put your hands directly onto the
Eraser
Wrinkle Eraser
.
5
You can use the hooks on either
WARNING: Never steam any
side of the vertical press pad for a
article of clothing while it is
larger pressing area.
being worn.
6
When steaming lightweight
1
Hang the vertical press pad on
garments, the VELCRO
a door.
can be used in place of a
2
Hang the garment onto the
hanger to attach a garment
garment hook.
directly to the pad.
Hold the steam trigger
for continuous steam.
The steam will stop
emiting once you let
go of the button.
Wipe away condensation
from the frame with
extended use.
7
When finished using the
garment steamer, turn the
appliance "O" and let it cool
before emptying the water tank
and removing the bonnets and
frames if necessary.
Using the Press & Refresh
horizontally:
8
The Press & Refresh
used to deodorize, sanitize, and
refresh upholstered items: sofa,
baby bedding, mattress, car
seat, drapes, and more.
9
Attach the upholstery/delicate
frame and upholstery steam
bonnet to the unit.
directly onto the fabric.
10
In a horizontal position, move
the steamer in a up and down
motion continuously over the
upholstered item.
®
clips
can be
11

Advertisement

loading