Advertisement
[3] Setting the MIDI Channel
The MIDI channel of the FC6 is automatically set to channel 1 when the power is turned on.
(1) "C1" (Channel 1) is indicated in the LED display when the UTILITY switch is pressed.
(2) Change channels by pressing the foot switches A-F. The number (and the operation of the current mode) is
the same as when selecting program numbers.
(3) Press the UTILITY switch again to return to normal operation.
[4] Installing Batteries
Six C-sized batteries are provided with this instrument. Install the batteries according to the following
instructions.
(1) Turn off the power.
(2) Take off the battery cover at the bottom of the instrument. Remove the screw holding the battery cover in
place with a screwdriver or a coin.
(3) Take out the battery holder. Be careful not to damage the cord of the battery snap.
(4) Insert the six batteries, checking that the positive and negative terminals match the indications on the
battery holder.
(5) Securely connect the battery snap to the terminal of battery holder.
(6) Replace the battery holder and battery cover.
* When battery power is low, the internal indicator flashes. Replace the batteries when it flashes.
* Connect the battery snap to the terminal of the battery holder even when using the AC adaptor. The terminal
of the battery holder might touch the internal plate or other metal parts and may interfere with normal operation.
* Do not connect any other object, except the battery holder of this instrument, to the battery snap.
Specifications
Display:
Numeric indicator x3; A, B, C, D, E, F (2 colors for each), UTILITY
Connecting terminals:
MIDI OUT, REMOTE, DC9VIN, SW1/2, PEDAL1/2
Power:
6x1.5 V C-sized batteries, or AC adaptor (Power supply is not necessary when the remote cable is
connected.)
Battery life:
Approximately 10 hours (continuous use)
Dimensions
(W x D x H): 440mm x 160mm x 42mm (17-5/16" x 6-5/16" x 1-11/16")
Weight:
1.4kg (3 lbs. 1 oz.) (including batteries)
Included accessories:
6x1.5 V C-sized batteries, remote cable RCC-050 (5m)
Optional accessories:
AC adaptor KAC-301, remote cable RCC-100 (10m)
Specifications are subject to change without notice.
- 4 -
Advertisement
