Advertisement
IMPORTANT NOTE FOR RF EXPOSURE
To comply with the FCC RF exposure compliance requirements, no
change to the antenna or the device is permitted. Any change to
the antenna or the device could result in the system exceeding the
RF exposure requirements.
SAFETY INFORMATION FOR DEVICES LESS THAN 200mW ERP
Your wireless microphone contains a low power transmitter. When
the EUT is powered on, it sends out radio frequency (RF) signals.
In August 1996, the Federal Communications Commissions (FCC)
adopted RF exposure guidelines with safety levels for wireless
devices.
To maintain compliance with the FCC's RF exposure guidelines, hold
the transmitter and antenna at least 1 inch (2.5 centimetres) from
your face and speak in a normal voice, with the antenna pointed up
and away from the face. Ensure that the antenna is at least 1 inch
(2.5 centimetres) from your body when you are using your wireless
microphone.
Use only the supplied antenna. Unauthorized antennas, modifica-
tions, or attachments could damage the transmitter and may violate
FCC regulations.
RISK OF ELECTRIC SHOCK
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
THE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PERSONNEL.
The lightning symbol is intended to alert you to the presence of uninsulated,
dangerous voltage within this product's enclosure that might be of sufficient
magnitude to constitute a risk of electric shock. Do not open the product's
case.
The exclamation symbol is intended to inform you that important operating
and maintenance instructions are included in the literature accompanying
!
this product.
CAUTION
DO NOT OPEN
WARNING: T o reduce
the risk of fire or shock
!
hazard, do not expose
this product to rain or
moisture
8
Advertisement
