Table of Contents
Advertisement
49-537.fm Page 8 Thursday, August 19, 1999 9:16 AM
(Normally Open) Terminals —these
REMOTE N.O.
terminals connect to your alarm system's remote
arm/disarm terminals. They provide the switch clo-
sure needed to arm and disarm the alarm.
Note: Some systems require connection to nor-
mally closed remote arm/disarm terminals. If your
system has a normally closed switch, you must set
to
and enter your code twice to arm and
LATCH
IN
disarm the system.
Terminals—these terminals
TAMPER/PANIC (N.O.)
connect to the alarm's normally open tamper/panic
loop. These terminals provide the signal to trigger
your alarm if someone tampers with the keypad or
you press # and Q on the keypad at the same time.
Note: If your system only has a normally closed
panic loop, do not use these terminals.
8
Hide quick links:
Advertisement
Table of Contents
