OEM IW-SYS3 Owner's Manual page 10

Buttons & Basic Features
16
Feature / Button
DISC/USB
DISC/USB:
13
Press the DISC/USB button to listen to the Compact Disc. Press again to listen to the USB drive.
If either one of these inputs are active, pressing the button will switch to the other input.
AUX
AUX:
14
Press the AUX button to listen to the Auxiliary input that is located on the back of the system.
15
IR Remote Sensor:
16
This is the receiver for the IR remote control. The remote has a maximum range of approximately 10
meters (33 feet) across an angle of about +/- 30 degrees. The range will diminish at wider angles and
in the presence of bright sunlight. The remote must have an unobstructed visual path to the sensor
for proper operation.
IW-SYS3:
In-Wall Audio System
10
17
Selects the CD or USB input.
Selects the Auxiliary input.
DISC SLOT: CD, CD-R and CD-RW drive.
The CD player will accept audio CD's and CD-R & CD-RW discs with MP3, and WMA files.
Insert the disc label-side up until the disc stops about half-way into the slot. The disc will be
retracted into the drive automatically. The DISC input must be selected for disc playback.
The disc will automatically begin playing after initialization (10-20 seconds). See DISC/USB
and REV-SKIP FWD-SKIP
functions. The disc can be loaded and unloaded when another input is active.
Infrared Remote Sensor
Rev. C
20
18
15
18 for more information on using the disc player and its
19
Navigation Functions
AM / FM / CD / AUX / USB AM / FM / CD / AUX / USB
13