Advertisement
Technical
852/853/854 Peltier Racks
Front Panel
Liquid-Contact Materials
Manufacturing Standards
Power Requirements
Rack Capacity
Software
Temperature Range
Dimensions* (w x d x h)
Weight
Programmable Peltier Controller
Front Panel
Display Panel
Manufacturing Standards
Modes
Power Requirements
Software
Communication Interface
Dimensions (w x d x h)
Weight
For applications or additional information, contact your local Gilson Technical Sales Representative or visit www.gilson.com.
Gilson, Inc. World Headquarters
Middleton, WI 53562 USA
Telephone: 800-445-7661 or 608-836-1551
Fax: 608-831-4451
www.gilson.com
sales@gilson.com, service@gilson.com, training@gilson.com
©2004 Gilson, Inc. 303066-02. Printed in the USA. Specifications subject to change without notice. Gilson, Inc., Gilson S.A.S. and Gilson International B.V. are ISO 9001 certified.
Specifications
HOT, COLD and STANDBY indicator lights
Anodized cast aluminum (T6061 and T5052 H32), stainless steel (300 series), polypropylene
Meets applicable Safety and EMC certif ication standards; UL and CE certif ied
Voltage: 5 and 24V DC
Current rating: 0.2A at 5V or 5.0A at 24V
852: Two Becton Dickinson Falcon™ assay plates, 96-well, shallow, "U-Bottom"
853: 96 f lat-bottom vials, 12 x 32 mm (2 mL)
854: Two Ritter or Beckman microplates, 96-well, deep
Via Programmable Peltier Controller keypad or Gilson control software
4–40°C
11.9 x 33.8 x 16.8 cm (4.7 x 13.3 x 6.6 in.)
*Up to five 85X Series Peltier Racks will fit on the locator plate of a single-probe 215 Liquid Handler.
852: 3.4 kg (7.6 lbs.)
853: 4.9 kg (10.7 lbs.)
854: 3.8 kg (8.4 lbs.)
POWER indicator light; 25 soft keys
40-character, four-line backlit LCD
Meets applicable Safety and EMC certif ication standards; UL and CE certif ied
Cooling (C): The current temperature of the rack is more than 2°C warmer than the set temperature
Heating (H): The current temperature of the rack is more than 2°C cooler than the set temperature
Initializing (I): The rack is initializing
Ready (R): The current temperature of the rack is ±2°C of the set temperature
Stopped (S): The temperature of the rack is no longer being regulated
Error (E): The rack is in an error state. Contact Gilson for assistance
Programming (P): The rack is in the programming state. Contact Gilson for assistance
Frequency: 50–60 Hz
Voltage: 90–240V
Current rating: 8.0A for 90–120V or 4.0A for 220–240V (max.); 6.0A for 90–120V or 3.0A for 220–240V (typical)
Internal fuses: Five 5A subminiature PC board fuses to be replaced by service personnel only
Via Gilson control software
RS-232 or GSIOC
26.5 x 43.5 x 15.6 cm (10.4 x 17.1 x 6.2 in.)
8.4 kg (18.6 lbs.)
Gilson S.A.S.
19, avenue des Entrepreneurs
F-95400 VILLIERS LE BEL France
Advertisement
