Common Troubleshooting - YATOUR YT-M06 User Manual

Changer, press FM/AM or other audio playback mode button, then press
CD button to switch to existing CD Changer. And vice versa.
9. MP3/CDC Switch Cable is provided for existing CD Changer on
vehicles except for VAG cars. Power off your radio or vehicle and switch
between MP3(Yatour) and CDC (Original CD changer). For some
vehicles, you may need to restart the radio for once after operation on
MP3/CDC Switch.
VII Common Troubleshooting
1. Digital Music Changer doesn't work after installation.
Please check whether the wire harness is correctly connected. And if
there is GND wire(for some car models), please check whether it connects
well with metal parts of car radio.
2. After installation, I pressed CD button for switch, it can switch to
MP3 playback status, but only one CD folder works, how should I do?
This problem is probably caused by improper folder structure you
saved/organised in USB device/SD card. Please follow the rules as
above-stated, to access the music, it is important that the music has been
s a v e d / o r g a n i s e d i n t o f o l d e r s w h i c h a r e n a m e d C D 0 1 , C D 0 2 ,
CD03...CD99. Otherwise, all tracks/songs will be recognised as only one
virtual CD disk.
3. When auxiliary audio device is connected via AUX IN slot, I can still
hear music sound from USB device, how to do with this?
Please then remove the USB device/SD card
before you use the AUX IN, otherwise,
not automatically stop.
4. When playing tracks from AUX device, it is running quite well, but
cannot be controlled by head unit, either tracks or CD folders cannot
be switched, what can I do?
AUX is an external audio input, you can only adjust the volume via head
unit when in AUX playback status. It is normal that you cannot switch
tracks or CD folders. So if you need full-function control via head unit,
please replace AUX with SD card or USB flash stick.
from Digital Music Changer
USB device/SD card
—[ 8 ]—
playback will