XRPlus XRS 1000 Series User Manual page 45

Client
④ Event/Sensor Setup
• Alarm Input
- Setup for Each Channel Alarm Connection & Type.
• Alarm Out
- Setup each channel when alarm, video loss, motion are happened.
- HDD Event: Alarm On/Off when HDD has the problem.
- Operation: Setup Relay Connect with Alarm Sensor
- Mode: Setup Reacted Relay as Latched/Transparent Mode
- Type: Setup Relay Type N/Open or N/Close
- Duration: Setup Reacted Relay Time (5sec~5min or Until key-in)
• Buzzer out
- Setup each channel when alarm, video loss, motion are happened.
- Buzzer: On/Off
- Duration: Buzzer time(5sec~5min or Until key-in)
- HDD Event: Buzzer On/Off when HDD event happen
- Keypad : Setup Key Input Sound
- Remocon: Setup remocon Input Sound
• E-mail Notification
- If happen the alarm, video loss, motion and HDD event, setup the notification at the E-mail.
- HDD Event: E-mail notification On/Off when HDD event is happened.
- Notification: On/Off
• HDD Event
- Drive ID: HDD Connected location
- Smart Alarm: On/Off
- Temperature: HDD Temperature
- Polling Time: HDD Checking Time
( 45 )
User's Manual