Daewoo Video recorder Instruction Manual page 4

Put the batteries into the remote control. Make sure the (+) and (-) signs on the batteries agree with the (+)
and (-) signs in the battery compartment.
Setting up your video (Option 1) - Connecting your video through RF lead
Before you start, unplug all the equipment from the mains supply.
1
Television
AC 230V
50 Hz
If you have connected your video as shown in option 1, turn to page 7.
Setting up your video (Option 2) - Connecting your video through a scart lead
Before you start, unplug all the equipment from the mains supply.
Television
2
AC 230V
50 Hz
With this connection, if your VCR is receiving BBC1 and your TV is showing CH4, when you press the TV/VCR button on
the remote control, your TV will automatically display BBC1.
In most cases you will not be able to change channels using the controls on your TV until you turn this
feature off by pressing TV/VCR on your remote control.
You will get better picture and sound quality if you connect your video with a scart lead.
If you have connected your video as shown in option 2, turn to page 8.
4
Back view of your VCR
This lead is supplied in your accessory kit.
Scart lead (If supplied)
Aerial
The type of aerial
depends on local
interference and how far
you are from the
transmitter. You should
contact a local electrical
if you have any questions
about your aerial.
Aerial