Table of Contents
Advertisement
2-7
Frequency/Voltage Control
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
CPU Frequency
PCIE Clock
K8 CPU Clock Ratio
Display Output
TV Mode Support
Robust Graphics Booster
: Move
Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Frequency
200.0~300.0MHz
PCIE Clock
100~145MHz Set PCIE Clock from 100MHz to 145MHz.
K8 CPU Clock Ratio
This setup option will automatically assign by CPU detection. The option will display "Locked" and
read only or will not show up if the CPU ratio is not changeable.
Display Output
This feature allows you to set signal output from the D-Sub(VGA) or S-Video(TV) port.
RGB
Set signal output from the D-Sub port. (Default value)
TV
Set signal output from the S-Video port.
AUTO
The signal will output from S-Video if you connect the output device to the S-Video
port. If there is no output device on the S-Video port, the signal will output from D-Sub.
TV Mode Support
Select the TV system, the options include: NTSC-M, NTSC-J, PAL-M, PAL-BDGHI, PAL-N and
PAL-NC.
Disabled Disable this function. (Default value)
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto
Set Robust Graphics Booster to Auto. (Default value)
Fast
Set Robust Graphics Booster to Fast.
Turbo
Set Robust Graphics Booster to Turbo.
GA-K8N51PVMT-9-RH Motherboard
Frequency/Voltage Control
[200.0]
[100Mhz]
[Default]
[RGB]
[Disabled]
[Auto]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Set CPU Frequency from 200MHz to 300MHz.
- 44 -
Menu Level
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
Advertisement
Table of Contents
