Interface Overview; Physical Interface - TP-Link TL-PA4010 User Manual

Ethernet LED

Note:
5 minutes after the device connected to the adapter is turned off, and the adapter will automatically
switch to the power-saving Mode.

2.3 Physical Interface

There are three physical interfaces on this Powerline Adapter.
Power Plug
Interface
A 10/100Mbps Ethernet port for connecting the adapter to the PC or the
Ethernet Port
broadband device with a network cable.
A Power Plug for connecting the adapter to a 100V ~ 240V AC power
Power Plug*
socket.
Pair buttons are used to secure a powerline network. To secure your
network, please follow the steps below. Firstly, plug in a new adapter, and
press its pair button for 1 second; then plug in another adapter and press its
Pair Button
pair button for 1 second as well. The two buttons should be pressed within 2
minutes of each other. After that, wait about 60 seconds so that the two
adapters can finish connecting.
*
The provided power plug may differ from the picture due to different regional power specifications.
Here we take the EU version of this product as an example.

Note:
1. If you press the Pair button for more than 10 seconds, the Powerline Adapter will leave the network
TL-PA4010
The adapter isn't connected to any powerline network or
Off
is in power-saving mode.
The Ethernet port is connected, but there is no data
On
being transferred.
Blinking The Ethernet port is transferring data.
Off The Ethernet port isn't connected.
5
AV500 Nano Powerline Adapter
Description
Pair Button
Ethernet Port