Tr0214; Tr0215; Tr0217 - IBM Cognos User Manual

Procedure
Use the logged information to identify which input data records contain invalid
source values, and then make the required corrections.

TR0214

The temporary file for source file source_file_name and PowerCube cube_name is
empty. Check that your source file contains data.
During the PowerCube creation process, Cognos Transformer has been unable to
find data for use in a PowerCube. This can happen if
v your source data file is empty
v you have applied one or more views that exclude all the data for all dimensions
v the timing for all data sources is such that none of them are used to create
v the data source containing measures for your model is associated with categories
v the source file contains BLOB (Binary Large Object) fields, which Cognos
Procedure
If your source file is an .iqd file, and you have IBM Cognos Impromptu installed,
rerun the report in Impromptu and ensure that data is being returned.

TR0215

The PowerCube cube_name (and n others) may require consolidation.
Consolidation can't be performed because of before-rollup calculations or because a
cube is designated as using Direct Create.
This message informs you that Cognos Transformer cannot perform consolidation
because there are conflicting settings in the model.
For example, consolidation cannot occur if the model contains calculated measures
with a rollup timing of Before Rollup because the consolidation process would
eliminate from the PowerCube the records required to perform the before-rollup
calculation.

TR0217

Data source data_source_name is turned off for cube generation, and the process
has halted.
This message can arise if the model contains structural data sources, and no
transactional (or measure) data.
256
IBM Cognos Transformer Version 10.1.1: User Guide
in a cube
PowerCubes
in an alternate drill-down path. For more information, see "TR1320" on page
284.
Transformer does not support