Integrated Peripherals - Gigabyte GA-8ANXP-D User Manual

2-3

Integrated Peripherals

On-Chip Primary PCI IDE
On-Chip RAID/AHCI Mode
x On-Chip SATA Mode
x PATA IDE Set to
SATA Port 0/2 Set to
SATA Port 1/3 Set to
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
Azalia Codec
Onboard H/W 1394
Onboard H/W SATA
H/W SATA Function
Onboard H/W LAN1
Onboard H/W LAN2
Onboard LAN1 Boot ROM
Onboard LAN2 Boot ROM
Onboard Serial Port 1
: Move Enter: Select
F3: Language
Onboard IrDA Port
UART Mode Select
UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move Enter: Select
F3: Language
On-Chip Primary PCI IDE
Enabled
Disabled
SATA RAID / AHCI Mode
RAID
AHCI
Disabled
GA-8ANXP-D Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
[Enabled]
[RAID]
Auto
Ch.1 Master/Slave
Ch.2 Master/Slave
Ch.3 Master/Slave
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Enabled]
[RAID]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[3F8/IRQ4]
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Save Default
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
[2F8/IRQ3]
[IrDA]
[Half]
[378/IRQ7]
[SPP]
3
+/-/PU/PD: Value
F5: Previous Values F6: Fail-Save Default
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Select onboard Seria ATA function as RAID. (Default value)
Support hotplug function under OS. WinXP, 2000 only.
Select onboard Seria ATA function as ATA.
- 36 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
F1: General Help