Advertisement
OPERATING INSTRUCTIONS
POWER SUPPLY
This CD clock radio operates on AC 230V~50Hz. It is also equipped with a clock battery back-
up system, powered by an optional 9V battery type 6F22 (not provided).
1. Insert the AC power cord (21) into a convenient standard AC wall outlet.
2. Connect the 9V battery inside the compartment at the bottom of the unit (30).
NOTE : An alkaline type battery is recommended. For optimum performance, this battery should
be replaced every 6 months.
BATTERY BACK-UP SYSTEM
Ensures that the unit will continue to operate as normal during AC power disruption (in order to
preserve the battery life the display will not light). All clock settings will be kept in the memory,
however, the clock time may require adjustment for exact accuracy. If this battery is not installed,
the display will blink
0:00
to indicate that you have to redo the time and alarm settings.
SETTING THE TIME
1. Press and hold TIME (13) and MINUTE or HOUR (6) to adjust to your desired time.
2. Release TIME (13) to store your setting in memory.
LISTENING TO THE RADIO
1. Switch to FM or AM position with the function selector (18).
2. For a better reception in FM, extend the antenna (20). In AM, rotate the unit.
3. Press POWER (15).
4. Adjust the volume (19) to the desired level.
5. Select your desired radio station (17) and (31) - (If the FM station is being received in stereo,
the FM STEREO LED indicator (26) will alight).
6. To stop listening to the radio press Power (15).
LISTENING TO THE CD PLAYER
1. Open the CD door (16), load your disc (label up) into CD compartment (1).
2. Switch to the CD position (18).
3. Press POWER (15), the Display (27) will show total track numbers. It will return to the clock
time after few seconds.
4. Press
(4) to start listening from the first track. The Display (27) will show , then it will
return to the clock time.
NOTE : Use also this knob to suspend momentarily the playing track.
Press once again to continue playing.
5. Rotate the volume (19) to adjust the desired level.
6. Press
(8) to stop listerning the disc.
OTHER CD PLAYER FUNCTIONS
SKIP / FAST SEARCH
(6): Press
to skiptracks. Press
return to the beginning of the track, or press repeatedly to skip backwards
several tracks. Press and hold
or
REPEAT (7):Press once to repeat your selected track. REPEAT indicator (25) blinks.
Press twice to play the disc continuously. REPEAT indicator (25) alight.
Press again to switch off this function, REPEAT indicator (25) goes off.
to skip forward to the next track or repeatedly
to search quickly within a track.
- GB - 7 -
PROGRAM(10): To set your own musical program.
1. Insert the disc (16, 1). The total number of tracks is displayed (27).
2. Press (10), the display show "
3. Select with
or
(6) your desired track, then press (10) to store your program
in memory. Redo this operation as many times as necessary. 20 tracks can be
memorised.
4. Press
(4) to start playing..
5. Press
STOP (8) to stop the disc.
6. To cancel this function, open the CD compartment
RANDOM : 1. Press RANDOM (5) to select RANDOM play mode and it will play randomly all
the tracks of the CD. RANDOM indicator (24) alight.
2. Press again to switch off this function until the RANDOM indicator (24) goes off..
SETTING THE ALARM AND WAKE UP MODE
This unit allows you to set two different wake up times which you can choose to use
independently or simultaneously AL 1 or AL 2, or AL 1 and 2.
SETTING THE ALARM
1st Alarm (AL 1) - Press and hold the ALARM 1 (11), and press
desired alarm time, then release ALARM 1 (11) to store your setting in memory.
2nd Alarm (AL 2) - Press and hold the ALARM 2 (14) and redo the same operation as above.
Select your wake-up mode (3) in AUTO (for RADIO or CD), BUZZER (for alarm sound) or OFF
to switch off the alarm.
Select you wake-up time with alarm selector (2).
WAKE UP TO THE BUZZER SOUND
1. Follow procedures 1 to 6, in "LISTENING TO THE RADIO", to select your desired radio
station.
2. Switch to the AUTO position (3), the alarm indicator (28 and/or 32) will alight.
WAKE UP TO THE CD
1. Follow procedures 1 to 6, in "LISTENING TO THE CD PLAYER".
2. Switch to the AUTO (3) position, the alarm LED indicator (28 and/or 32) will alight.
3. Press POWER (15) and POWER indicator (22) goes off
NOTE : If the CD play time is longer than 60 minutes, the music will stop after playing.
WAKE UP TO THE PROGRAMMABLE CD TRACKS
1. Switch to the CD position (18) and press POWER (15). POWER indicator (22) alight.
2. Follow procedures 1 to 5 in "LISTENING TO THE CD PLAYER - PROGRAM ".
3. Switch to the AUTO (3) position, the alarm LED indicator (28 and/ or 32) will alight.
4. Press POWER (15) and POWER and PROGRAM indicators (15, 23) goes off.
NOTE : The music will stop after the programmed tracks, e.g. if one track is programmed, the
alarm will stop at the end of this track. The programmed memory will be erased once the CD
door be opened.
". PROGRAM indicator (23) blinks
or
(6) to adjust your
- GB - 8 -
Advertisement
