Table of Contents
Advertisement
Owner's Manual
iConnectivity
iConnectMIDI™ Owner's Manual
Revision 0.5
Power/Status
Green - power is ON, status OK
Red - power is ON, error has occurred (reset is
needed)
MIDI DIN input 1
Green flashing - MIDI data being received at the
IN connector
Black - no data
MIDI DIN output 1
Green flashing - MIDI data being transmitted at
the OUT connector
Black - no data
MIDI DIN input 2
Green flashing - MIDI data being received at the
IN connector
Black - no data
MIDI DIN output 2
Green flashing - MIDI data being transmitted at
the OUT connector
Black - no data
USB devices
Green flashing - MIDI data being sent or
received from any of the USB device ports
Black - no data
USB device port 1
Green flashing - MIDI data being sent or
received from iOS device or computer
Black - no data
USB device port 2
Green flashing - MIDI data being sent or
received from iOS device or computer
Black – no data
Reset Switch
Located on the side of iConnectMIDI is the recessed RESET button. You will need a narrow,
firm-tipped object to depress the button inside the recess (such as a paper clip or mechanical
pencil). Press and hold the RESET button for one second and then release it to initialize a warm
boot.
Page 14
Advertisement
Table of Contents
