Setting The Clock (Remote Control Only); Ipod, Iphone And Ipad; Listening To The Ipod, Iphone Or Ipad - Sharp XL-HF201PH Operation Manual

Setting the clock (Remote control
only) (continued)
5
To adjust the hour, press the
press the ENTER button. Press the
once to advance the time by 1 hour. Hold it down to
advance continuously.
6
To adjust the minutes, press the
then press the ENTER button. Press the
button once to advance the time by 1 minute. Hold it
down to advance the time by 5 minutes interval.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in again
or after a power failure, reset the clock (pages 6 - 7).
To readjust the clock:
Perform "Setting the clock" from step 1. If the "Clock" does not
appear in step 2, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Factory
reset, clearing all memory" on page 21 for details.]
2
Perform "Setting the clock" from step 1 onwards.

Listening to the iPod, iPhone or iPad

Made for:
th
● iPod touch (4
generation)
rd
● iPod touch (3
generation)
● iPod touch (2 nd
generation)
● iPod touch (1 st
generation)
● iPod classic
● iPod nano (6 th
generation)
● iPod nano (5 th
generation)
th
● iPod nano (4
generation)
rd
● iPod nano (3
generation)
● iPod nano (2 nd
generation)
● iPhone 4
● iPhone 3GS
● iPhone 3G
● iPhone
● iPad
Caution:
Please update your iPod, iPhone and iPad unit to the latest
software version before using it. Please visit Apple's
homepage to download the latest version for your iPod,
iPhone and iPad.
Notes:
● Charging terminal for iPod, iPhone and iPad:
Condition
USB function
Other function
Stand-by
● The message "This accessory is not made to work with
iPhone" or similar, mat appear on the iPhone screen
when:
- battery is low.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
● This product is made for iPod, iPhone and iPad. To
prevent random interference when iPod, iPhone or
iPad is connected, the headphone output is disabled,
and "HP INVALID" will be displayed.
You may also experience brief audio interference
during incoming calls.
or button and then
or button
or button and
or
DOCK USB
NO YES
YES NO
YES NO
■ iPod, iPhone and iPad connection (USB
only)
1
Insert the connector to the iPod, iPhone or iPad.
iPad
Connector
2
Place the iPad to the stand for iPad.
iPad
Stand for iPad
3
Connect the iPod, iPhone or iPad to the unit via USB
connector.
Note:
USB terminal do not support VIDEO out.
■ iPod, iPhone or iPad playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the USB button on the remote control or
FUNCTION button repeatedly on the main unit to select
USB function.
3
Connect iPod, iPhone or iPad to the unit. "USB/iPod" will
appear.
4
Press the / (CD/USB
Note:
Stop button ( ) is invalid during iPod, iPhone or iPad
playback.
■ iPhone playback
● Sound will only switch from iPhone to the main unit
after authentication
approximately 10 seconds.
● Incoming calls will pause the playback.
● Once the calls are answered, the conversation can only
be heard through the built-in iPhone speaker. Turn on
the iPhone speaker or undock the iPhone to start
conversation.
E-7
USB
Track number
/ ) button to start playback.
process is completed in