FujiFilm FINEPIX JZ500 Series User Manual page 5

I
Viewing Pictures
Pictures can be viewed in the monitor. When
taking important photographs, take a test shot
and check the results.
1
Press the [B button.
*;:<
Deleting Pictures
To delete the picture currently
displayed in the monitor, press the
selector up (mi). The follOWing
dialog will be displayed.
The most recent picture will be displayed in
the monitor.
2
View additional pictures.
Press the selector right to view
pictures in the order recorded, left
to view pictures in reverse order.
Press the shutter button to exit to shooting
mode.
3
Zoom in on images.
Select
C.J
to zoom in on pictures displayed
in single-frame playback; select
I...'
to zoom
out.
When the picture is zoomed in, the selector
can be used to view areas of the image not
currently visible in the display.
': " Zoom indicator
ilI~
N . . . d
"'--- aVlgatlOn
Win
ow
shows portion of
image currently
displayed in monitor
Press
DISP/BACK
to exit zoom.
OK
To delete the picture, highlight OK
and press MENU/OK. To exit without
deleting the picture, highlight
CANCEL and press MENU/OK.
~{f,
Copying Pictures to aComputer
The supplied software can be used to copy
pictures to a computer, where they can be
stored, viewed, organized, and printed.
1
Start the computer. Insert the software CD
into the CD-ROM drive.
The installer will start automatically.
2
Click Installing MyFinePix Studio/Installing
FinePixViewer.
Follow the on-screen instructions to install
the software.
3
Turn the camera off, and connect the
supplied USB cable as shown. Press the
[E] button for about a second to turn the
camera on.
MyFinePix Studio or FinePixViewer
will start automatically; follow the on-
screen instructions to copy pictures to
the computer. To exit without copying
pictures, click Cancel.
EN-4 ENGLISH