Dual Is Mode - FujiFilm FINEPIX JZ500 Series User Manual

Framing Guideline (Best Framing)
In shooting mode, press DISP/BACK to select a
shooting display format. The selection changes
each time DISP/BACK is pressed.
INFORMATION
ON
• Best Framing: To use the best framing, position the
main subject at the intersection of two lines or
align one of the horizontal lines with the horizon.
16
Taking Pictures in SRC (SCENE RECOGNITION) Mode
Avoiding Blurred Pictures
If the subject is poorly lit,
blurring caused by camera
shake can be reduced by
activating the Z DUAL IS
MODE. k CONTINUOUS,
l SHOOTING ONLY or OFF
can be set in the setup menu
(pg. 79).
B Tip
INFORMATION
OFF
When using the camera with a tripod, Z DUAL IS
MODE is recommended to be OFF.
A Note
Sensitivity is raised when dual IS is in effect. Note
BEST FRAMING
that blurring may still occur depending on the scene
or shooting conditions.
SET-UP
3
/4
LCD BRIGHTNESS
LCD MODE 2
CONTINUOUS
AUTO POWER OFF ON
SHOOTING ONLY

DUAL IS MODE

OFF ON
RED EYE REMOVAL
OFF
DIGITAL ZOOM OFF