Download Print this page

Topcom FEETWARMER 1000 User Manual page 4

Hide thumbs Also See for FEETWARMER 1000:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
TOPCOM Feetwarmer 1000
1.
Power adapter Jack
2.
Heating switch
3.
Vibration intensity switch
Plug one end of the power adaptor (12V, 1000mA) into the power adapter jack
the remote controller.
Plug the other end into the 100-240V mains power socket.
Choose a comfortable chair matching your stature.
For best use, place the Feet Warmer 1000 on a flat floor.
Put both feet into the massage slot.
Set the intensity switch
To deactivate the vibration, set the switch
To activate the heating, set the heating switch
To deactivate the heating, set the switch
Dimensions (W/H/D)
Weight
Power supply
Input:
Output:
Remove the fleece lining from the feet massager by opening the zipper.
Machine washing of the inner lining is possible; however, hand wiping will prolong the life of the lining.
Place the inner lining in a
Use a small amount of detergent and set the washing machine to a "
When washed, remove the lining from the net bag and drape it on a clothes line to dry.
Allow the blanket to dry
The inner lining is washable, but do not attempt to machine wash outer fabric.
Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
Do not wring out
Do not dry using a tumble dryer
Do not iron
Do not dry clean.
Don't connect the Feet Warmer 1000 to power supply to dry it.
Don't dry it in the sun or iron it, which will cause safety problems because of the aging of the insulating layer.
Do not use an appliance such as a hair dryer to dry it
Store the device in its original box on a safe, dry and cool place. Avoid contact with sharp edges or pointed objects which might
cut or puncture the fabric. Do not wrap power adapter cord around the unit. Do not hang the unit by power adapter cord.
4
to
for low intensity vibration or to
to position
to position
to position
300 x 340 x 210 mm
770 g
100-240 V AC / 50-60 Hz / 1.3A
DC 12 V / 1000 mA
and seal it.
naturally.
3
on top of
for high intensity vibration.
" with a maximum temperature of
TOPCOM Feetwarmer 1000
1
I
O
2
O
Feetwarmer 1000
.

Advertisement

loading