Exhaust Fan; Care And Cleaning; Removing Control Panel And Gasket - Amana AKGD3050 Series Owner's Manual

Exhaust Fan

Variable speed fan is built into center of cooktop. Fan is
located beneath vent area. Fan operation is necessary
to remove cooking vapors, odors, and smoke.
1. Turn fan knob to desired setting.
• Fan automatically turns on at low speed when
using grill or griddle. Fan can be manually turned
to high speed. Fan cannot be turned off while grill
or griddle.
• Fan can be used during any cooking operation or
to ventilate cooking area.
• Clean vents frequently. Grease should not be
allowed to accumulate on vent or filter.
2. Turn fan control knob to OFF when you are finished
using it.
Exhaust Fan Control Knob
Removing Vent Filter
1. Lift filter cover to remove vent filter.
• Duct filter lifts out of vent.
2. Clean and reinstall filter and vent cover.
• Clean in the dishwasher or with damp cloth and
soapy water.
!
WARNING
To avoid risk of smoke damage or fire, do not
operate cooktop without filter.
Removing Vent Filter
OFF

Care and Cleaning

!
To avoid risk of electrical shock, personal injury, or
death, make sure cooktop has been properly
grounded and always disconnect it from main power
supply before cleaning.

Removing Control Panel and Gasket

1. Pull knobs off stems to remove glass panel.
2. Lift glass out of control panel.
3. Lift gasket out of control panel.
4. Replace gasket and knobs after cleaning.
• Clean according to "Cooktop Surfaces"
instructions in "Cleaning Cooktop" section.
• Dry gasket thoroughly before replacing.
D
A—Fan control knob
B—Burner control knob
C—Gasket
D—Control panel
Control Panel
20
WARNING
OFF OFF
OFF OFF
A
B
C