Maintenance; Internal Cleaning; External Cleaning; Periods Of Non-Operation - Electrolux ER7425D Installation And Instruction Manual

Table of Contents

Advertisement

Unplug the appliance before carrying out any
maintenance operation.

Internal cleaning

Never use metal objects for cleaning your appliance
as it may get damaged.
Clean the inside and accessories of the refrigerating
compartment with warm water and sodium
bicarbonate (one tablespoon in 4 litres of water).
Rinse and dry thoroughly.
Clean the inside of the freezer compartment after each
complete defrosting.

External cleaning

Wash the outer cabinet with warm soapy water.
Do not use abrasive products.
Once or twice a year dust the condenser (black grill)
and compressor at the back of the appliance with a
brush or vacuum cleaner. An accumulation of dust
will affect the performance of the appliance and cause
excessive electricity consumption.

Periods of non-operation

When the appliance is not in use for long periods,
disconnect from the mains, empty and clean, leaving
the door ajar to prevent unpleasant smells.
What to do if the appliance is not
functioning properly.
If something is not working properly, check that:
the plug is firmly in the wall socket and the mains
power switch is on;
there is an electricity supply (find out by plugging in
another appliance);
the thermostat knob is in the correct position.

MAINTENANCE

Replacing the interior light bulb

The light bulb inside the refrigerator compartment can
be reached as follows:
If the door is open and the light does not come on,
check that it is screwed in adequately; if it still does
not work, replace it with one of the same power.
The rating is shown on the light bulb cover.
D411

CUSTOMER SERVICE

If the appliance seems too noisy, check that the sides
are not touching furniture that can transmit or amplify
a noise or a vibration. Also, check that the piping of
the refrigerant system does not vibrate.
If there are water drops on the bottom of the cabinet,
check that the defrost water drain opening is not
obstructed.
If your appliance is still not working properly after
making the above checks, contact the nearest service
centre.
To obtain fast service, it is essential that when you
apply for it you specify the model & serial number of
your appliance which can be found on the rating plate.
unscrew the light cover securing screws;
unhook the moving part by pressing it as shown in
the figure.
GB
Fig. 12
GB
35
3

Advertisement

Table of Contents
loading

Table of Contents